Poslovni center Mlekarna
Čučkova 6
2250 Ptuj
TEL: 02 / 7800 433
El. pošta:

Delovni čas
Pon - pet: 09:00 - 18:00
Sobota: 09:00 - 12:00
Nedelja - prazniki: zaprto
Žabjak 60
2250 Ptuj
TEL: 02 / 7800 430
Dežurna številka:
040 729 367
El. pošta:
Delovni čas
Pon - pet: 08:00 - 17:00
Sobota, nedelja in prazniki: Zaprto


Sobota, 18 Avgust 2018

Golf vozila : YTF2-E

The strong and silent type




The Yamaha YTF2 is the clear choice for those sensitive working environments where a silent running, zero emission utility vehicle is preferred.

Equipped with an industry-leading 48V AC motor that produces 5 kW/6.7 HP, this rugged and reliable 2-seater gives all the performance you need to get your work done. Its 535 litre/363 kg capacity cargo bed can move tools and equipment swiftly to where they're needed, while the pneumatic-assist tilt bed makes dumping materials or waste quick and easy.

And with Yamaha's class-leading design and advanced technology, this reliable and efficient 2-seat workhorse is ready to become an indispensible member of any workforce.


  • Smooth and quiet running 48V AC electric motor
  • Industry leading 5kW/6.7HP power output
  • Light and strong HybriCore™ chassis
  • Tru-Trak II™ independent front strut suspension
  • Swingarm type rear suspension
  • 4-wheel self-adjusting brakes
  • Comfortable contoured seamless vinyl seats
  • Durable and flexible body panels
  • Headlights and tail lights
  • Strong acceleration with adjustable top speed
  • 363kg/535 litre capacity cargo tilt bed
  • 2-inch hitch receiver





Smooth and quiet running 48V AC electric motor

Smooth and quiet running 48V AC electric motor

The YTF2 is fitted with the latest generation 48V electric motor that delivers smooth and responsive performance with virtually no noise and zero emissions. The high output, low maintenance design makes this reliable 2 seat utility vehicle a valued addition to every workforce.

Utility dump bed

Utility dump bed

With a 535 litre, 363kg payload capacity, pneumatic-assist tilting, fold & lock tailgate, and roto-molded linear polyethylene construction, the dump bed is where the hard work gets done.

4-wheel brakes

4-wheel brakes

Self-adjusting drum brakes on all four wheels give plenty of smooth and progressive stopping power when you're driving with a full load.

Heavy-duty suspension

Heavy-duty suspension

We use an automotive-style, coil-over-shock strut suspension that minimises roll and delivers a smooth, comfortable ride. That means extra heavy-duty performance, front and rear.

Headlights and tail lights

Headlights and tail lights

If the sun goes down before your work is done, there's no need to worry. The YTF2 comes as standard with sealed, halogen headlights and tail lights to help you find your way back to the barn.

Resilient 2-inch hitch receiver

Resilient 2-inch hitch receiver

Designed with versatility in mind, the standard 2-inch hitch receiver accommodates a wide variety of pull-behind accessories.

Light and strong HybriCore™ chassis

Light and strong HybriCore™ chassis

The YTF2's HybriCore™chassis has been constructed using the latest technology, and features a welded automotive ladder-style steel frame that is fitted with a tough and lightweight polypropylene floor, giving a light and strong structure.

Energy-absorbing bumper

Energy-absorbing bumper

The extra-thick 8km/h-rated bumper is designed to protect the body and frame, releasing air upon impact. The textured surface minimises scratches and scuffs, and if you need to replace the bumper, simply loosening two bolts does the job.



Tehnični podatki



Overall length

2,922 mm

Overall width

1,243 mm

Wheel base

1,917 mm

Overall height (no sun top)

1,200 mm

Front wheel tread

990 mm

Rear wheel tread

980 mm

Minimum ground clearance

115 mm

Power supply/Drive train

Engine type

Yamaha built, low emission single cylinder 60° incline OHV



Bore x stroke

85 mm x 63 mm


8.5 kW @ 3,500 rpm

Compression ratio

8.1 : 1

Lubrication system

Splash-style positive oil lubrication

Oil tank capacity

1 litres

Air cleaner

Two-stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge

Cooling system

Forced air


Mikuni BV26-18

Ignition system

Transistor magneto ignition


Hitachi 48-volt high-efficiency, shunt wound motor with internal solid state tachometer


EnduraDrive V-belt automatic forward/reverse transaxle equipped with high-precision helical gears, 13.65 : 1 drive axle ratio



HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-base coating, and an electrostatically applied polyester/urethane powder topcoat


Custom-formulated thermoplastic olefin, and the front painted with a two-part top coat of high-luster automotive-grade polyurethane


Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends

Front suspension

Tru-Trak II™ fully independent automotive-style strut suspension

Rear suspension

Unit swing arm with coil springs over hydraulic shock absorbers


Self-adjusting, mechanical drum brakes on all 4 wheels


Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp- and moisture-resistant polypropylene bottom, strengthened with plated steel inserts


Front 8 km/h energy-absorbing bumper


Maximum forward speed

24 km/h

Maximum reverse speed

18.4 km/h

Turning radius

3.3 metre


Dry weight

384 kg

Cargo box material

Roto-molded linear Polyethylene

Cargo bed capacity

363 kg

Cargo bed size (LxWxH)

1,209 mm x 1,243 mm x 356 mm

Cargo bed load height

609 mm

Fuel tank capacity

22.0 litres

Tyre size

Front: 18.00 x 8.50-8.00 (4-ply rating), Rear: 18.00 x 8.50-8.00 (6-ply rating)

Seating capacity

2 persons